XHnotion Pneumatic TG-01 tire air inflator with metal body, air inflation gun
FEATURES
Using a tire inflation gun is straightforward, but following the correct steps ensures accuracy and safety. Here's a step-by-step guide on how to use it:
1. Prepare the Tire Inflation Gun
Check the Equipment: Ensure the tire inflation gun is in good working condition and that it has a fully charged or connected power source (for pneumatic models, this means checking the air compressor).
Select the Correct Nozzle: Attach the appropriate nozzle or adapter for your tire valve if it's not pre-installed.
2. Check the Tire Pressure
Remove the Valve Cap: Unscrew the valve cap from the tire valve stem.
Inspect the Tire Pressure: Some inflation guns have a built-in pressure gauge. If not, you may need to check the tire pressure separately using a tire pressure gauge.
3. Attach the Inflation Gun
Connect to Tire Valve: Firmly attach the nozzle of the tire inflation gun to the tire valve stem. Make sure it's securely attached to prevent air leakage.
Ensure Proper Fit: The nozzle should create a tight seal around the valve. If there's hissing or air escaping, the connection might not be secure.
4. Inflate the Tire
Activate the Gun: If your tire inflation gun has a trigger or switch, engage it to start inflating the tire. For digital models, you may need to set your desired pressure before starting.
Monitor the Pressure: Keep an eye on the pressure gauge to ensure you're inflating to the correct pressure level. Over-inflating can be dangerous, so inflate gradually and check often.
5. Finish Inflation
Check the Pressure: Once you've reached the desired pressure, release the trigger or turn off the inflation gun.
Remove the Gun: Carefully detach the inflation gun from the tire valve. Be mindful of any residual air pressure that might escape.
Replace the Valve Cap: Screw the valve cap back onto the tire valve stem to prevent dirt and moisture from entering.
6. Clean Up
Store the Equipment: Put away the tire inflation gun and any other tools you used.
Inspect for Leaks: Check the tire and the inflation gun for any signs of air leaks or damage.
Safety Tips
Read the Manual: Always refer to the manufacturer's instructions for specific details on using your tire inflation gun.
Wear Safety Gear: If working with high-pressure systems, consider wearing safety glasses and gloves.
Avoid Over-Inflation: Be cautious not to exceed the tire's maximum pressure rating, which is usually found on the tire's sidewall.
By following these steps, you'll ensure accurate and safe tire i
SPECIFICATION
| Application |
use with air tanks or compressors |
| Thread |
1/4'' |
| Pressure |
0-150psi |
DETAIL
Packing & Shipping
Packing:
Transparent plastic bag + white small box + neutral carton + pallet
Custom packaging are available, XHnotion brand packaging are available
Shipping :
Export port: Ningbo or Shanghai, China.
Shipping way: by sea, by air, by courier.
Express: TNT, DHL, UPS, FedEx, SF Express.
Delivery time: 3 days to 30 days depends on actual orders.
Our Company
XHnotion originate from notion between pneumatic power and human.
(X stands for winds, H stands for human)
In Chinese, XHnotion stands for 'we do, we promise' we read it 'X-notion'.
The company XHnotion Pneumatic was founded in 2007 and has developed with a steadily growing success to a reliable partner for international established clients.
This success of the company XHnotion Pneumatic is based on:
High class quality standard
Customer satisfaction
Fair price policy
Flexibility
The high-class quality standard of the products of company XHnotion is reflected in our quality management system, certificated ISO 9001:2008. And we got CE, RoHS, REACH certificate for international market.
XHnotion Pneumatic manufactures below products:
Pneumatic Components: air cylinder, solenoid valve, FRL
Solenoid Calve: standard solenoid valve, multipurpose solenoid valve, pneumatic angle valve
Pneumatic Fittings: plastic pneumatic fittings, mental pneumatic fittings, pneumatic muffler, water push in fittings
Air Gun & Couplers: pneumatic couplers, air guns, air tool kits
Air Hoses: air tubing, PTFE tubes, tube cutter, pipes
Why Choose US ?
1. We offer one stop solution. Over 5000 items for you to save efforts and costs.
2. We have molds workshop, die-casting workshop, CNC workshop, plastic injection workshop to
make sure each part exactly as the drawing and good function.
3. We will reply you within 24 hours.
4. Whatever quantity you are requesting, we always offer you the best quality.
5. 3D drawing, CAD drawing service for custom fittings, hose, valve, cylinde
FAQ
Payment Terms :
We accept T/T, L/C, Paypal, Western Union, Money Gram, etc.
Samples Policy :
For regular valves, samples against your courier account or you pick up from us.
For custom items, we will discuss by email.
Return Policy:
We assure you 1 year policy after shipment.
If there is any problem during this period, please contact us for support.
){kind=link}